MODEL NO.: CPVCS
VIAL SEALING MACHINE
OPERATION:
Automatic Aluminum Cap Sealing Machine is a compact model used for sealing of aluminum caps on vials. Depending on the output required the numbers of sealing heads changes. (As per customer's requirements)
Duly Stoppard Vials are continuously fed from the turntable of filling machine to the flat conveyor belt of sealing machine and move further through in feed worm for correct spacing and transferred to the in feed star wheel.
Flip off / Aluminum / tear off caps kept in vibratory bowl automatically orient caps in right direction before entering the delivery chute. Vial during its rotation movement with in feed star wheel, its picks up Aluminum seal from the retaining finger of delivery chute and correctly position on the vial before entering sealing turret. Vial now moves on the spring loaded sealing platform, where free spinning sealing rollers moves gradually inside to complete the sealing operation during rotational movement of sealing platform turret. Now sealed vials are transferred to exit star wheel pocket and further moves out on to the flat conveyor belt.
SILENT FEATURE:
- Parts coming in contact with the vial / aluminum cap / exposed to the atmosphere are made out of stainless steel, good house keeping and good manufacturing practice.
- Single motor synchronizes conveyor, star wheels and platform turret and speed can be varied by the % speed pot on operating panel.
- A Special clutch device is incorporated on the in feed worm and Star wheel system for stoppage of machine in the event, vial is over turned or over diameter.
- A photo sensing device stops machine automatically in the event, there is no aluminum cap in delivery chute.
- "No Stopper on Vial, Machine Stops System", eliminates chances of sealing of vial without rubber stopper on sealing machine.
- Spring loaded free spinning sealing rollers eliminates any damage to aluminum caps and also allows greater flexibility of variation in the container neck diameter.
- Sealing Pressure can be varied to suit different gauges and sizes of aluminum caps.
- Imported Gear Motor for Main drive.
- A.C. Frequency drives for Main drive.
- Digital Counter for counting number of sealed vials.
- "No Seal in Chute, Machine Stops System"
- Acrylic Cabinet with S. S. / Aluminum Structure for Machine. (Optional)
©2009-2010 Chitra Pharma Machinery. All Rights Reserved. | Other Website Chitrapharma.com
Web Design & Search Engine Optimization (SEO) by Va Infotech.
TECHNICAL SPECIFICATION
|
MODEL NO. |
CPAVCS-1 |
CPAVCS-4 |
CPAVCS-8 |
|
Direction |
Left To Right. |
Left To Right. |
Left To Right. |
|
Production Rate |
10 ml Vial 60 Vials / Min |
10 ml Vial 120 Vials / Min |
10 ml Vial 200 Vials / Min |
|
Electrical Supply |
1.0 HP For Main Drive |
1.50 HP For Main Drive |
2.0 HP For Main Drive |
|
No of Sealing Head |
Single |
Four |
Eight |
|
Power Requirement |
440 Volts, 3 Phase (4 wire System) 50 Hz. |
440 Volts, 3 Phase (4 wire System) 50 Hz. |
440 Volts, 3 Phase (4 wire System) 50 Hz. |
|
Height of Conveyor |
Adjustable from 800 To 850 MM |
Adjustable from 800 To 850 MM |
Adjustable from 800 To 850 MM |
