Vacuum Powder Filling Machinery, Automatic Vacuum Powder Filling Machine, Vacuum Powder Filling Machine, Vacuum Powder Filling Machines Equipments, Plants, Manufacturer, Exporter And Supplier From India, Pharmaceutical Machine, Pharma Machinery

MODEL: CPAVPF

AUTOMATIC VACUUM POWDER FILLING MACHINE

NOTE: Automatic, Semi automatic table top model also available, with sized filling volumes, best for precise and compressed powder fill.

OPERATION:

Automatic Vacuum Powder Filling machine is a compact model used for filling of Powder in to Bottles / containers, The incoming dry container sterilized are fed through the in feed Un-scrambler and suitably guided on the moving S. S. / delrin flat conveyor belt at the required speed of the correct placement below powder wheel.

The powder is stored in powder hopper is agitated by pair of mechanical agitators for maintaining consistency and uniform bulk density. The powder wheel having eight ports rotates at the pre determined speed below the powder hopper with practically no clearance. Powder wheel consist of Piston in each port and behind the powder wheel vacuum plate is provided there is no clearance between powder wheel and vacuum plate due to back spring pressure. Precise volume of powder is sucked in to the port of powder wheel during vacuum according to the piston length different fill size can be achieved. The excess powder is doctored off by a doctor blade. Doctor blades can be adjusted from outside also without removing powder hopper. When powder wheel indexes further and remain in the port due to the vacuum till it reaches just vertically above the container. The time dose of Compressed air (Nitrogen Gas), sterilized low pressure air sequentially flushes out powder from the port of powder wheel in to the container one by one.

The filled container is immediately separated on the conveyor by vial separator and moves further for operation. (Different grooves separator can be used which depends on the container diameter or multiple dosing systems).

Web Design & Search Engine Optimization (SEO) by Va Infotech.

TECHNICAL SPECIFICATIONS:

MODEL NO.	CPAVPF-1	CPAVPF-2
Direction	Left To Right.	Left To Right.
Production Rate	Up to 60 Fill Per Minute in Single Dose Up to 30 Fill Per Minute in Double Dose Up to 20 Fill Per Minute in Triple Dose	Up to 60 Fill Per Minute in Single Dose per wheel Up to 30 Fill Per Minute in Double Dose per wheel Up to 20 Fill Per Minute in Triple Dose per wheel
Fill Capacity	10 grms to 50 grms. Single Dose 9with change parts) Fill range depending upon Bottle opening And bulk density of powder.	10 grms to 50 grms. Single Dose 9with change parts) Fill range depending upon Bottle opening And bulk density of powder.
Accuracy	+- 2% depending upon consistency and the Uniformity of bulk density of powder. Under controlled level of Humidity (i.e. 35%)	+- 2% depending upon consistency and the Uniformity of bulk density of powder. Under controlled level of Humidity (i.e. 35%)
Electrical Supply	2.00 HP For Main Drive	3.00 HP For Main Drive
Power Requirement	440 Volts, 3 Phase (4 wire System) 50 Hz	440 Volts, 3 Phase (4 wire System) 50 Hz
Height of Conveyor	Adjustable from 900 to 950 MM	Adjustable from 900 to 950 MM
Dimensions	1800 MM (L) X 1250 MM (W) 2100 MM (H)	2100 MM (L) X 1450 MM (W) 2100 MM (H)