"Precious"Semi
Automatic Pre - Filled Syringe Stoppering Machine
Semi Automatic pre-filled syringe Evacuation Stoppering machine is very compact and elegant microprocessor based GMP model for automatic stoppering operation of pre-filled syringe.
OPERATION :
Operator has to keep a nest(tray) of 100 prefilled syringes over the SS jig. Then he has to put a plugs tray with suitable stoppers over the SS-316 plug tray. Then after he has to close the evacuation and stoppering chember. Now he can start the machine.
Automatic filling cycle start one by one as per the programmed stoppering cycle mentioned as under. 100 stoppers are pluged into the prefilled syringes precisely after vaccum hold cycle. Now last cycle of nitrogen flushing with vaccum break completes the stoppering operation.
Program Cycle for evacuation and stoppering
Cycle
Operation
1
Vaccum evacuation in the chamber
2
Nitrogen Flushing.
3
Vaccum Evacuation repeats.
4
Nitorgen flushing repeats.
5
Vaccum creation with hold.
6
Plunging of stopper inside the prefilled syringes
7
Nitrogen purging cycle with Vaccum break.
Salient
Features
Model : PFS Eva - 03 is a compact, elegant and matt - finished encompassed with stainless steel (SS-304)
Perfect synchronization of microprocessor based cycle , stoppers and piston.
Compact and feather-touch control panel for easy control of the machine operation.
The machine is equipped with easily adjustable leveling legs so foundation is not require.
Nitrogen filter is provided pre-filter 0.5u. and final filter is 0.2u. air ex. Is 0.2u.
Utilities :
Sterile air and nitrogen.
Important Requirements
1
Vacuum pump is to be installed outside the sterile area.
2
Silicon tubes are under the scope of customer.
3
Water line is required for cooling of vacuum pump chambers.
