- It operates on the principle of variable force swing beaters having both knife and impact edges rotating within a selected screen to get the required size reduction.
- Material fed in the hopper, goes down to the processing chamber where it moves to the periphery and passes through the screen radially and tangentially. Finally the processed material gets collected in the container kept below the processing chamber.
- Output and quality of the final product depends on three main factors
- Shape of beaters (knife/impact edges),
- All contact parts can be easily and quickly dismantled and cleaned.
- Machine is designed for continuous operation.
- Cylindrical screen for higher output.
- Flame proof electrical can be provided at extra cost.
TECHNICAL SPECIFICATION
|
Model |
MM-50 |
MM-100 |
MM-200 |
|
Output |
10 to 50 Kgs. / Hr. |
25 to 100 Kgs. / Hr. |
50 to 200 Kgs. / Hr. |
|
Rotor Assembly Diameter |
100 mm Approx. |
150 mm Approx. |
250 mm Approx. |
|
Rotor Speed |
750 / 1500 / 2300 / 3000 RPM |
750 / 1500 / 2300 / 3000 RPM |
750 / 1500 / 2300 / 3000 RPM |
|
Beaters |
12 Nos. knife and impact edges and 2 Nos. scraper blades |
12 Nos. knife and impact edges and 2 Nos. scraper blades |
12 Nos. knife and impact edges and 2 Nos. scraper blades |
|
Screen dimension |
Inner Diameter 60 mm / Height 135 mm |
Inner Diameter 160 mm / Height 135 mm |
Inner Diameter 260 mm / Height 135 mm |
|
Motor |
0.25 Hp / 1440 RPM / 440 V. / 50 Hz. AC |
0.1 Hp / 1440 RPM / 440 V. / 50 Hz. AC |
3 Hp / 1440 RPM / 440 V. / 50 Hz. AC |
|
Starter |
Selector reversible switch |
"DOL" with reversible switch |
"DOL" with reversible switch |
|
Material charging height |
1000 mm |
1250 mm |
1445 mm |
|
Material discharging height |
Variable as required by client |
Variable as required by client |
730 mm |
