- Blister Pack is mainly used to form, fill and seal pharmaceutical products like tablets, capsules, draggers etc. in blister pack
- In operation, PVC base film web is drawn off from a reel and fed into the blister-forming unit where blisters are continuously formed. The web is then led to the sealing unit over a guide track
- Over the guide track, the product is filled into the blisters by suitable automatic filling unit before the web enters the sealing unit
- Aluminum foil is drawn off from a separate reel and is fed to the sealing unit where it is sealed with the base web, thus enclosing the product hermetically
- The filled and sealed web is then fed by an indexing mechanism into the pack punch unit where the packs are separated from the web. The web trim is sheared off to allow collection. The blister pack may either be collected in bins or may be conveyed over a belt for further handling. The machine could be linked to a cartooned.
- The operating cycle of this machine is completely automatic and the use of continuous motion principle permits high speed and efficient packaging production
- The blister forming die is cooled by an integral water cooling unit and is maintained at a correct operating temperature
- The fully automatic tablet feeding unit with photo-level control and vibrator guarantees positive filling of blisters with minimum deposition if dust on the sealing surface
- Guide tracks between blister forming unit and sealing unit provides essential space for visual and/or electronic inspection of missing tablets
- Patented and attractive sealing pattern is crease proof and eliminates capillary formation of aluminum foil on sealing
- The speed of the machine is infinitely variable
- The temperature of the blister forming heaters and sealing roller are controlled by a variance and temperature controller respectively and can be regulated for optimum results during machine operation
- All format parts are easily accessible and change over are swiftly effected by simple mechanisms
- The machine is of wholly indigenous make. Services and spares are easily avail
TECHNICAL SPECIFICATION
|
MODEL |
PBP-1 PACK |
PBP-2 PACK |
|
NO OF TRACK |
SINGLE |
DOUBLE |
|
PVC BASE FILM |
124 MM |
210 MM |
|
PVC FILM THICKNESS |
0.2 TO 0.3 MM |
0.2 TO 0.3 MM |
|
PVC REEL DIA MAX |
440 MM |
440 MM |
|
ALUMINIUM FOIL WIDTH |
120 MM |
206 MM |
|
ALUMINIUM FOIL THICKNESS |
0.02 TO 0.03 MM |
0.02 TO 0.03 MM |
|
TOTAL FORMING AREA |
MIN. 25 x 110MM / MAX. 100 X 110 MM |
MIN 25 X 210 MMMAX 102 X 210 MM |
|
PACK LENGTH |
116 MM |
200 MM |
|
PACK WIDTH |
100 MM |
100 MM |
|
FORMING DEPTH |
16 MM |
16 MM |
|
OUTPUT |
- |
- |
|
PACKS/MIN |
150 |
300 |
|
TABLETS/ MIN |
1500 |
3000 |
|
POWDER REQUIREMENT |
4.5 KVA |
8 KVA |
|
COMPRESSED AIR EQUIPMENT |
60FBS.PER SQ.INCH / 4 BAR MIN OPERATING PRESSURE 540 N1/ MIN |
60 FBS/SQINCH/4 BAR PR 540 N1/MIN |
|
COOLING WATER EQUIPMENT |
120 LTRS / HR – 3 BAR –18C20C |
120 LTRS/HR @3 BAR-18’C –20’C |
